DDCY - Bi-directional flow and anti-acid filter driers

Products

You are here : Home > Products > - Bi-directional flow and anti-acid filter driers

Filtering - Drying - Decontamination

DDCY - Bi-directional flow and anti-acid filter driers

Technical description

• Refrigerant filtering, drying and acid neutralization for refrigerating and air conditioning installation liquid lines with change over in flow direction, including heat pumps.

DDCY - Bi-directional flow and anti-acid filter driers

Technical documentation
(pdf - 202 ko)

CARLY advantages

Bi-flow filter driers with very low pressure drop, thanks to an innovative CARLY patented system, in terms of flow circuiting.
No risk of discharge of the pollutants trapped inside the filter driers, during change over in flow directions.
High drying and acid neutralization capacity at all temperatures, thanks to a rigorous selection and a judicious mix of chemical agents present in the filter driers (alumina activated to neutralise the acids and molecular sieves to adsorb moisture).
Initial drying capacity guaranteed by a 200°C oven drying and airtight sealing.
A dispenser located at the intake ensures optimal distribution and permanent treatment of the whole refrigerant, inside the filter drier.
Connections to solder are made of copper-plated steel and allow the use of filler metals with a low silver content; their resistance to pressure is much higher than that of full copper connections.
GOST certified product.

>> CARLYSOFT : Our component selection assistance software

>> Compliance declarations Article 3§3 (pdf - 418 ko)

>> GOST certification (pdf - 297 ko)

>> REACH communiqué (pdf - 749 ko)

>> Weights / Packaging (pdf - 1288 ko)

>> General sales terms (pdf - 337 ko)

Product references

DDCY 082 / DDCY 082 MMS / DDCY 082 S / DDCY 083 / DDCY 083 MMS / DDCY 083 S / DDCY 084 / DDCY 084 MMS / DDCY 084 S / DDCY 163 / DDCY 163 MMS / DDCY 163 S / DDCY 164 / DDCY 164 MMS / DDCY 164 S / DDCY 165 / DDCY 165 S/MMS / DDCY 305 / DDCY 305 S/MMS