• Products
  • Custom products
  • Spare parts
  • Documents
  • Services
  • Company
  • Contacts
  • Air-conditioning
  • Refrigeration
  • Renewable energies
  • Industrial maintenance
You are here : Home > Products > - Oil separators, welded
Oil regulation system

TURBOIL - Oil separators, welded


Technical description
• Separation and recovery of the oil carried by the refrigerant in vapour phase at compressor outlet of refrigerating and air conditioning installations.

• The TURBOIL® oil separators limit the amount of oil within the circuit, thus allowing increasing the performances of the heat exchangers and prevent abnormal wear, even the breakage of compressors by lack of oil.

• They must be used in applications where the return of oil through the suction is not guaranteed: facilities with long pipes, oil traps, with evaporation temperatures lower than - 5 °C, with compressors in parallel, or with variable speed, for systems with multiple compressor stages in cascade, Flood, Booster...

• They ensure a regulated oil return to the compressor crankcases and participate by their position on the circuit, in the reduction of the vibrations generated by the compressors and sound level of the discharge gas.
TURBOIL - Oil separators, welded
CARLY advantages
  • Maximum working pressure up to 46 bar.
  • Reliability and efficiency of the TURBOIL® oil separators are ensured thanks to a CARLY patented process, simultaneously associating several oil separation techniques:
    ➜ centrifugation by helical motion generated by one or several spirals
  • ➜ coalescence thanks to the needled material of these spirals
    ➜ sudden modification of speed by increase of the flow area located at the separator’s inlet
    ➜ sudden change of direction: inlet of the mixture by the top, outlet of the refrigerant from the higher lateral part and outlet of the oil from the lower part.
  • Low pressure drop compare to a separator using coalescent cores
  • Do not need specific maintenance operations, because there is no cores to be replace periodically.
  • The presence of an internal baffle eliminates a new risk of the oil being carried by the refrigerant.
  • Presence of a 1/4” NPT drain plug in the lower part from model TURBOIL® F-7011 S/MMS to model TURBOIL 9017 S/MMS and from model TURBOIL-F 2505 S/MMS to model TURBOIL-F 30025 S/MMS.
Extra information
>> Technical documentation
pdf - 561 ko
>> Spare parts
pdf - 180 ko
>> Correction factors
pdf - 943 ko
>> Abbreviations and units
pdf - 880 ko
>> Connection features and drawings
pdf - 927 ko
>> General assembly precautions
pdf - 1075 ko
>> Weights and packaging
pdf - 985 ko
>> Compliance declarations Category 1
pdf - 398 ko
>> REACH communiqué
pdf - 770 ko
>> Warning - General sales terms
pdf - 1328 ko

Product references
TURBOIL 1503 MMS / TURBOIL 1503 S / TURBOIL 1504 MMS / TURBOIL 1504 S / TURBOIL 2505 S/MMS / TURBOIL 3006 MMS / TURBOIL 3006 S / TURBOIL 3007 MMS / TURBOIL 3007 S / TURBOIL 3009 MMS / TURBOIL 3009 S / TURBOIL 3011 S/MMS / TURBOIL 4007 MMS / TURBOIL 4007 S / TURBOIL 6009 MMS / TURBOIL 6009 S / TURBOIL 6011 S/MMS / TURBOIL 7011 S/MMS / TURBOIL 8013 MMS / TURBOIL 8013 S / TURBOIL 9017 S/MMS
© 2018 CARLY - Legal notices
Source: http://www.carly-sa.com