SCY - Discharge line mufflers

Products

You are here : Home > Products > - Discharge line mufflers

Noise annoyance and vibration reduction

SCY - Discharge line mufflers

Technical description

• Reduction of noise caused by gas pulses in the discharge lines of refrigerating and air conditioning installations.

Technical documentation
(pdf - 229 ko)

CARLY advantages

Design allows coverage of a wide range of frequencies.
Discharge line muffler mounting is possible in vertical and horizontal positions. There is no oil trap whichever the position. The refrigerant can flow in both directions.
Excellent distribution of the refrigerant in its gaseous phase, with minimum pressure drop.
Connections to solder are made of copper-plated steel up to connections diameter 3/4” included and allow the use of filler metals with a low silver content; their resistance to pressure is much higher than that of full copper connections.
GOST certified product.

>> CARLYSOFT : Our component selection assistance software

>> Compliance declarations Article 3§3 (pdf - 383 ko)

>> Compliance declarations Category 1 (pdf - 451 ko)

>> GOST certification (pdf - 297 ko)

>> REACH communiqué (pdf - 749 ko)

>> Weights / Packaging (pdf - 1288 ko)

>> General sales terms (pdf - 337 ko)

Product references

SCY 110 S/MMS / SCY 130 MMS / SCY 130 S / SCY 170 S/MMS / SCY 210 MMS / SCY 210 S / SCY 250 MMS / SCY 250 S / SCY 30 MMS / SCY 30 S / SCY 40 MMS / SCY 40 S / SCY 50 S/MMS / SCY 60 MMS / SCY 60 S / SCY 70 MMS / SCY 70 S / SCY 90 MMS / SCY 90 S